2 Inch EYEBALL GIMBAL LED RECESSED LIGHTING 5W
LLL2G24V are meant to be hard wired with a 24V driver only - no connectors are provided
Gimbal Yet Air-Tight Without Housing Needed. Patented in USA and Canada
5 Watt - 430 Lumens - 3000 Kelvin - White Trim - Wet Location - 90 CRI - LL2G24V-30K-WH
- ModelLL2G
- cULus Listed, Energy Starand T24 Certified
- Type IC Rated - Approved for Direct Contact with Insulation
- Air-Tight, Wet Location, Insulated and Non Insulated Ceilings
- Superb Light Quality with CRI 90
- Triac dimmable with most CL Dimmers (120V input model only)
- Recessed Housing is NOT Required even for Insulated Ceilings
- Warranty: 10 Year on Residential, 5 Year on Commercial Installations
CONSTRUCTION:
Round 2 Inch Gimbal fixtures with integral LEDs. Class 2 Isolated external driver factory installed inside junction box.
One driver for every fixture required.
MOUNTING:
Cut hole in ceiling and snap fixture in opening with attached spring clips.
Ceiling Clearance Required: 1 1/2 Inch with driver remotely installed, 5 Inch if driver is next to the fixture.
- Default Driver Input Voltage: 120V AC 60 Hz (Dimmable)
- 24V DC model Input Voltage: 20-28V DC (Not Dimmable)
- Power factor: > 0.95
- Energy Used: 5W
- Halogen equivalent: 35W
- Beam Angle: 24° Beam with 20° tilt and 360° rotation
- Ambient Operating Temperature: -40°F (-40°C) to 104°F ( 40°C)
- Compliance: ULus approved, certified toCSASTD. C22.2 No. 250.0
- Rated:Type IC(Direct Contact with Insulation),Energy Star,T24,Air-Tight
DIMENSIONS:
- ID 2 Inch, OD 2 1/2 Inch; Thickness 1 1/2 Inch
- Cut out: 2 Inch to 2 1/8 Inch
- Junction Box Dimensions (with driver inside): 3 3/4 Inch x 2 Inch x 1 3/4 Inch
Suitable for wet locations and soffit installations.
Gimbal Yet Air-Tight Without Housing Needed. Patented in USA and Canada
5 Watt - 380 Lumens - 2700 Kelvin - White Trim - Wet Location - 90 CRI - LL2G24V-27K-WH
- ModelLL2G
- cULus Listed, Energy Starand T24 Certified
- Type IC Rated - Approved for Direct Contact with Insulation
- Air-Tight, Wet Location, Insulated and Non Insulated Ceilings
- Superb Light Quality with CRI 90
- Triac dimmable with most CL Dimmers (120V input model only)
- RecessedHousing is NOT Required even for Insulated Ceilings
- Warranty: 10 Year on Residential, 5 Year on Commercial Installations
CONSTRUCTION:
Round 2 Inch Gimbal fixtures with integral LEDs. Class 2 Isolated external driver factory installed inside junction box.
One driver for every fixture required.
MOUNTING:
Cut hole in ceiling and snap fixture in opening with attached spring clips.
Ceiling Clearance Required: 1 1/2 Inch with driver remotely installed, 5 Inch if driver is next to the fixture..
- Default Driver Input Voltage: 120V AC 60 Hz (Dimmable)
- 24V DC model Input Voltage: 20-28V DC (Not Dimmable)
- Power factor: > 0.95
- Energy Used: 5W
- Halogen equivalent: 35W
- Beam Angle: 24° Beam with 20° tilt and 360° rotation
- Ambient Operating Temperature: -40°F (-40°C) to 104°F ( 40°C)
- Compliance: ULus approved, certified toCSASTD. C22.2 No. 250.0
- Rated:Type IC(Direct Contact with Insulation),Energy Star,T24,Air-Tight
DIMENSIONS:
- ID 2 Inch, OD 2 1/2 Inch; Thickness 1 1/2 Inch
- Cut out: 2 Inch to 2 1/8 Inch
- Junction Box Dimensions (with driver inside): 3 3/4 Inch x 2 Inch x 1 3/4 Inch
Suitable for wet locations and soffit installations.
